304 SAE AMS 5913B-2014 Stainless steel wire manufacturer

According to the SAE AMS 5913B-2014 standard, the tensile strength of 304 stainless steel wire is 185ksi (1276MPa), which shows its excellent mechanical properties.

Material designation	304
Other names	19Cr-9.2Ni
Correspondence standard	SAE AMS 5913B-2014 Steel,Corrosion-Resistant,Sheet and Strip 19Cr-9.2Ni Cold Rolled ,Full Hard, 185ksi(1276Mpa) Tensile Strength
Sort out	Austenitic stainless steel
Property	Strength Corrosion resistance low temperature ductile forging
Tag	Austenitic stainless steel composition similar to UNS S30400
Instructions	304 is a typical low-carbon austenitic stainless steel, corresponding to the domestic grade 0Cr18Ni9, the grade is on the basis of 302 to further reduce the carbon content of the obtained, with good processing molding and oxidation resistance, oxidation acid (such as nitric acid) has a strong corrosion resistance, alkali solution and most organic acids and inorganic acids also have a certain corrosion resistance. It has good welding performance. Austenitic stainless steel cannot be strengthened by heat treatment and can only be strengthened by work hardening.
	304 Good cold processing performance, bolts, screws can be cold heading molding, other products can also be bent, crimping, folding, deep drawing and other processing, hot processing performance can also be.
	304 is widely used in standard parts, in addition to the production of national standard products, but also the production of some low-strength beacon products, a variety of enterprise standard products more production.
	Selection suggestions:
	Tensile strength of 500Mpa or 700Mpa above, with oxidation resistance, acid, alkali and salt corrosion resistance, while there is no magnetic requirements, recommended use.
density	7.85g/cm3

304_SAE_AMS_5913B-2014 Stainless_steel_wire_manufacturer

304 stainless steel has good corrosion resistance and can resist the erosion of a variety of chemical substances, so it can maintain its stable performance in a variety of environments.

304 stainless steel also has a certain high temperature resistance, can maintain its strength and stability in a certain high temperature environment.

304 Chemical element content (%)

Ingredient	C	Si	Mn	P	S	Cr	Ni	Cu	Mo
Minimum value	-	-	-	-	-	18	8	-	-
Maximum value	0.08	1	2	0.04	0.03	20	12	1	1

Hot Tags: China,custom , 304 SAE AMS 5913B-2014 Stainless steel wire manufacturer , manufacturer,factory,supplier